#include <ossimHdfReader.h>

Inheritance diagram for ossimHdfReader:

Public Member Functions
	ossimHdfReader ()
	default construtor More...

virtual	~ossimHdfReader ()
	virtural destructor More...

virtual ossimString	getShortName () const
	Returns short name. More...

virtual ossimString	getLongName () const
	Returns long name. More...

virtual ossimString	getClassName () const
	Returns class name. More...

virtual ossimRefPtr< ossimImageData >	getTile (const ossimIrect &rect, ossim_uint32 resLevel=0)
	Method to grab a tile(rectangle) from image. More...

virtual bool	getTile (ossimImageData *result, ossim_uint32 resLevel=0)
	Method to get a tile. More...

virtual ossim_uint32	getNumberOfInputBands () const
	Returns the number of bands in the image. More...

virtual ossim_uint32	getNumberOfOutputBands () const
	Returns the number of bands in a tile returned from this TileSource. More...

virtual ossim_uint32	getImageTileWidth () const
	Returns the tile width of the image or 0 if the image is not tiled. More...

virtual ossim_uint32	getImageTileHeight () const
	Returns the tile width of the image or 0 if the image is not tiled. More...

virtual ossimScalarType	getOutputScalarType () const
	Returns the output pixel type of the tile source. More...

virtual ossim_uint32	getNumberOfLines (ossim_uint32 resLevel=0) const
	Gets number of lines for res level. More...

virtual ossim_uint32	getNumberOfSamples (ossim_uint32 resLevel=0) const
	Gets the number of samples for res level. More...

virtual bool	open ()
	Open method. More...

virtual bool	isOpen () const
	Method to test for open file stream. More...

virtual void	close ()
	Method to close current entry. More...

virtual ossimRefPtr< ossimImageGeometry >	getImageGeometry ()
	Returns the image geometry object associated with this tile source or NULL if non defined. More...

virtual bool	loadState (const ossimKeywordlist &kwl, const char *prefix=0)
	Method to the load (recreate) the state of an object from a keyword list. More...

virtual bool	setCurrentEntry (ossim_uint32 entryIdx)

virtual ossim_uint32	getNumberOfEntries () const

virtual void	getEntryList (std::vector< ossim_uint32 > &entryList) const

virtual ossim_uint32	getCurrentEntry () const

bool	isSupportedExtension ()

std::vector< ossim_uint32 >	getCurrentEntryList (ossim_uint32 entryId) const

ossimString	getEntryString (ossim_uint32 entryId) const

ossimString	getDriverName ()

virtual bool	setOutputBandList (const std::vector< ossim_uint32 > &band_list)
	If the image handler "isBandSeletor()" then the band selection of the output chip can be controlled. More...

Public Member Functions inherited from ossimImageHandler
	ossimImageHandler ()
	Constructor (default): More...

virtual	~ossimImageHandler ()
	Destructor: Derived classes should implement. More...

virtual void	initialize ()
	initialize Does nothing in this class. More...

virtual bool	openOverview ()
	Searches for an overview. More...

virtual bool	openOverview (const ossimFilename &overview_file)
	Calls closeOverview(), then attempts to open the overview_file. More...

virtual void	closeOverview ()
	If theOverview is initialized it will be deleted and set to NULL. More...

virtual const ossimImageHandler *	getOverview () const

virtual bool	hasOverviews () const

virtual ossimFilename	createDefaultOverviewFilename () const

virtual ossimFilename	createDefaultGeometryFilename () const

virtual ossimFilename	createDefaultMetadataFilename () const

virtual ossimFilename	createDefaultHistogramFilename () const

virtual ossimFilename	createDefaultValidVerticesFilename () const

virtual bool	writeValidImageVertices (const std::vector< ossimIpt > &vertices, const ossimFilename &file=ossimFilename(""))
	Outputs vertices to file and updates the internal vertex array variable "theValidImageVertices". More...

virtual bool	openValidVertices (const ossimFilename &vertices_file)
	Opens the valid image vertices file and sets theValidImageVerticesFile variable. More...

virtual bool	openValidVertices ()
	Creates vertices file name based on image, then tries to open. More...

virtual bool	open (const ossimFilename &imageFile, ossim_uint32 entryIndex)
	Opens the image file. More...

virtual bool	open (const ossimFilename &imageFile)

virtual bool	open (std::shared_ptr< ossim::ImageHandlerState > state)

virtual bool	buildHistogram (int numberOfRLevels=0, ossimHistogramMode mode=OSSIM_HISTO_MODE_NORMAL)
	Build a histogram for image file. More...

virtual bool	buildAllHistograms (int numberOfRLevels=0, ossimHistogramMode mode=OSSIM_HISTO_MODE_NORMAL)
	Build a histograms for all image entries. More...

virtual bool	buildOverview (ossimImageHandlerOverviewCompressionType compressionType=OSSIM_OVERVIEW_COMPRESSION_NONE, ossim_uint32 quality=75, ossimFilterResampler::ossimFilterResamplerType resampleType=ossimFilterResampler::ossimFilterResampler_BOX, bool includeFullResFlag=false)
	Will build over file for theImageFile. More...

virtual bool	buildAllOverviews (ossimImageHandlerOverviewCompressionType compressionType=OSSIM_OVERVIEW_COMPRESSION_NONE, ossim_uint32 quality=75, ossimFilterResampler::ossimFilterResamplerType resampleType=ossimFilterResampler::ossimFilterResampler_BOX, bool includeFullResFlag=false)
	Will build over file for all image entries. More...

virtual bool	buildOverview (const ossimFilename &filename, ossimImageHandlerOverviewCompressionType compressionType=OSSIM_OVERVIEW_COMPRESSION_NONE, ossim_uint32 quality=75, ossimFilterResampler::ossimFilterResamplerType resampleType=ossimFilterResampler::ossimFilterResampler_BOX, bool includeFullResFlag=false)
	Will build an over file for filename. More...

ossimRefPtr< ossimMultiResLevelHistogram >	getImageHistogram () const
	Fetches the current entry image's histogram. More...

virtual void	setImageGeometry (ossimImageGeometry *geom)
	Sets the image geometry object. More...

virtual void	saveImageGeometry () const
	Saves the image geometry to a file that will be made based on the image file name. More...

virtual void	saveImageGeometry (const ossimFilename &geometry_file) const
	Saves the image geometry to a file that will be made based on the image file name. More...

virtual ossimIrect	getImageRectangle (ossim_uint32 resLevel=0) const
	Returns zero-based bounding rectangle of the image. More...

virtual ossimIrect	getBoundingRect (ossim_uint32 resLevel=0) const
	Returns zero-based bounding rectangle of the image. More...

virtual void	getDecimationFactor (ossim_uint32 resLevel, ossimDpt &result) const

virtual void	getDecimationFactors (vector< ossimDpt > &decimations) const
	This returns all decimation for all levels. More...

virtual ossim_uint32	getNumberOfDecimationLevels () const
	This returns the total number of decimation levels. More...

virtual ossim_uint32	getNumberOfReducedResSets () const
	This method is obsolete. More...

virtual void	setFilename (const ossimFilename &filename)
	Sets the filename. More...

virtual const ossimFilename &	getFilename () const
	Returns the filename. More...

virtual bool	saveState (ossimKeywordlist &kwl, const char *prefix=0) const
	Method to save the state of an object to a keyword list. More...

virtual bool	isValidRLevel (ossim_uint32 resLevel) const
	Determines if the passed in reslution level is valid. More...

bool	canConnectMyInputTo (ossim_int32 inputIndex, const ossimConnectableObject *object) const
	Connection rule. More...

virtual void	getValidImageVertices (vector< ossimIpt > &validVertices, ossimVertexOrdering ordering=OSSIM_CLOCKWISE_ORDER, ossim_uint32 resLevel=0) const
	ordering specifies how the vertices should be arranged. More...

virtual bool	isBandSelector () const
	Indicates whether or not the image handler can control output band selection via the setOutputBandList method. More...

virtual bool	setOutputToInputBandList ()
	If the image handler "isBandSeletor()" then the band selection of the output are set to input or identity. More...

virtual bool	isIdentityBandList (const std::vector< ossim_uint32 > &bandList) const
	Convenience method to see if band list is identity. More...

virtual bool	isImageTiled () const
	Indicates whether or not the image is tiled internally. More...

virtual bool	hasMetaData () const

virtual ossimRefPtr< ossimNBandLutDataObject >	getLut () const

virtual bool	hasLut () const

virtual void	loadMetaData ()
	There is an external file with an omd extension. More...

virtual double	getMinPixelValue (ossim_uint32 band=0) const
	Retuns the min pixel value. More...

virtual double	getMaxPixelValue (ossim_uint32 band=0) const
	Returns the max pixel of the band. More...

virtual double	getNullPixelValue (ossim_uint32 band=0) const
	Each band has a null pixel associated with it. More...

virtual void	setMinPixelValue (ossim_uint32 band, const ossim_float64 &pix)
	convenience method to set min pixel value. More...

virtual void	setMaxPixelValue (ossim_uint32 band, const ossim_float64 &pix)
	convenience method to set max pixel value. More...

virtual void	setNullPixelValue (ossim_uint32 band, const ossim_float64 &pix)
	convenience method to set null pixel value. More...

virtual void	getEntryName (ossim_uint32 entryIdx, std::string &name) const
	Get the name of entry as a string. More...

virtual void	getEntryNames (std::vector< ossimString > &entryNames) const

bool	useEntryIndex () const
	Convenience method to determine if entry index should be used for support files, e.g. More...

ossimFilename	getOverviewFile () const

virtual void	setProperty (ossimRefPtr< ossimProperty > property)

virtual ossimRefPtr< ossimProperty >	getProperty (const ossimString &name) const

virtual void	getPropertyNames (std::vector< ossimString > &propertyNames) const

ossimFilename	getFilenameWithThisExtension (const ossimString &ext, bool set_e0_prefix=false) const
	Returns the image file with extension set using supplentary directory for dirname if set. More...

void	getFilenameWithThisExt (const ossimString &ext, ossimFilename &f) const
	Returns the image file with extension set using supplentary directory for dirname if set. More...

ossim_uint32	getStartingResLevel () const

void	setStartingResLevel (ossim_uint32 level)

bool	getOpenOverviewFlag () const

void	setOpenOverviewFlag (bool flag)
	Sets theOpenOverviewFlag. More...

virtual void	setSupplementaryDirectory (const ossimFilename &dir)
	Sets the supplementary directory. More...

virtual const ossimFilename &	getSupplementaryDirectory () const
	Returns the supplementary directory. More...

const ossimString &	getImageID () const
	Fetches the image ID. More...

void	setImageID (const ossimString &id)
	Sets the image ID in case it is externally generated. More...

ossimPixelType	getPixelType () const
	Returns the raster pixel alignment type. More...

virtual bool	getRgbBandList (std::vector< ossim_uint32 > &bandList) const
	Convenience method to get the zero based rgb output band list. More...

template<class T >
std::shared_ptr< T >	getStateAs ()

template<class T >
std::shared_ptr< const T >	getStateAs () const

std::shared_ptr< ossim::ImageHandlerState >	getState ()

std::shared_ptr< const ossim::ImageHandlerState >	getState () const

void	setState (std::shared_ptr< ossim::ImageHandlerState > state)

Public Member Functions inherited from ossimImageSource
	ossimImageSource (ossimObject *owner=0)

	ossimImageSource (ossimObject *owner, ossim_uint32 inputListSize, ossim_uint32 outputListSize, bool inputListIsFixedFlag=true, bool outputListIsFixedFlag=true)

virtual	~ossimImageSource ()

virtual ossimRefPtr< ossimImageData >	getTile (const ossimIpt &origin, ossim_uint32 resLevel=0)

virtual ossimObject *	getObject ()
	For RTTI support. More...

virtual const ossimObject *	getObject () const
	For RTTI support. More...

virtual void	getDecimationFactors (std::vector< ossimDpt > &decimations) const
	Will return an array of all decimations for each resolution level. More...

virtual void	getOutputBandList (std::vector< ossim_uint32 > &bandList) const
	Initializes bandList. More...

virtual ossim_uint32	getTileWidth () const
	Returns the default processing tile width. More...

virtual ossim_uint32	getTileHeight () const
	Returns the default processing tile height. More...

virtual void	getBoundingRect (ossimIrect &rect, ossim_uint32 resLevel=0) const
	Gets the bounding rectangle of the source. More...

virtual void	getValidImageVertices (std::vector< ossimIpt > &validVertices, ossimVertexOrdering ordering=OSSIM_CLOCKWISE_ORDER, ossim_uint32 resLevel=0) const
	ordering specifies how the vertices should be arranged. More...

virtual void	setImageGeometry (const ossimImageGeometry *geom)
	Default implementation sets geometry of the first input to the geometry specified. More...

virtual bool	isIndexedData () const

Public Member Functions inherited from ossimSource
	ossimSource (ossimObject *owner=0)

	ossimSource (ossimObject *owner, ossim_uint32 inputListSize, ossim_uint32 outputListSize, bool inputListIsFixedFlag=true, bool outputListIsFixedFlag=true)

virtual	~ossimSource ()

virtual bool	isSourceEnabled () const

virtual void	enableSource ()

virtual void	disableSource ()

virtual bool	getEnableFlag () const

virtual void	setEnableFlag (bool flag)

virtual bool	isInitialized () const

virtual void	setInitializedFlag (bool flag)

virtual std::ostream &	print (std::ostream &out) const
	Outputs theErrorStatus as an ossimErrorCode and an ossimString. More...

Public Member Functions inherited from ossimConnectableObject
	ossimConnectableObject (ossimObject *owner=0)
	Base constructor of this object. More...

	ossimConnectableObject (ossimObject *owner, ossim_int32 inputListSize, ossim_int32 outputListSize, bool inputListIsFixedFlag=true, bool outputListIsFixedFlag=true)

virtual	~ossimConnectableObject ()

void	setId (const ossimId &id)
	All connectable objects will have id's. More...

const ossimId &	getId () const
	Will allow us to get this object's id. More...

const ossimObject *	getOwner () const
	Fetches the current owner, most likely a container but not limited to one. More...

virtual void	changeOwner (ossimObject *owner)
	Permits changing the object's owner. More...

virtual void	setDescription (const ossimString &description)

virtual ossimString	getDescription () const

virtual bool	isConnected (ossimConnectableObjectDirectionType direction=CONNECTABLE_DIRECTION_INPUT) const
	will check the direction specified to see if all slots are full. More...

	OSSIM_DEPRECATE_METHOD (virtual ossimConnectableObject *findConnectableObject(const ossimId &id))

	OSSIM_DEPRECATE_METHOD (virtual ossimConnectableObject *findObjectOfType(RTTItypeid typeId, ossimConnectableObjectDirectionType directionType, bool recurse=true))

	OSSIM_DEPRECATE_METHOD (virtual ossimConnectableObject *findObjectOfType(const ossimString &obj, ossimConnectableObjectDirectionType directionType, bool recurse=true))

	OSSIM_DEPRECATE_METHOD (virtual ossimConnectableObject *findInputObjectOfType(const ossimString &className))

virtual ossim_int32	findInputIndex (const ossimConnectableObject *object)
	Return a valid index of the input list if the passed in object is found else return -1. More...

virtual ossim_int32	findInputIndex (const ossimId &id)
	Return a valid index of the input list if the passed id is found else return -1. More...

virtual ossim_int32	findOutputIndex (const ossimConnectableObject *object)
	Return a valid index of the output list if the passed in object is found else return -1. More...

virtual ossim_int32	findOutputIndex (const ossimId &id)
	Return a valid index of the output list if the passed in object is found else return -1. More...

virtual ossim_int32	getMyInputIndexToConnectTo (ossimConnectableObject *object) const
	Should return the first available index to connect to. More...

virtual ossim_int32	getMyOutputIndexToConnectTo (ossimConnectableObject *object) const
	Should return the first available index to connect to. More...

virtual bool	canConnectMyOutputTo (ossim_int32 myOutputIndex, const ossimConnectableObject *object) const
	default implementation is to allow anyone to connect to us. More...

virtual void	disconnect (ossimConnectableObject *object=0)
	Will disconnect the object passed in. More...

virtual void	disconnect (const ossimId &id)
	Will disconnect the object passed in. More...

virtual ossimRefPtr< ossimConnectableObject >	disconnectMyInput (ossim_int32 inputIndex, bool disconnectOutputFlag=true, bool createEventFlag=true)
	Will disconnect the object at the given input index and generate a connection event. More...

virtual void	disconnectMyInput (ossimConnectableObject *input, bool disconnectOutputFlag=true, bool createEventFlag=true)
	Finds the index of the passed in input and calls disconnectMyInput(inputIndex, disconnectOutputFlag, createEventFlag);. More...

virtual void	disconnectMyInputs (ConnectableObjectList &inputList, bool disconnectOutputFlag=true, bool createEventFlag=true)

virtual ossimRefPtr< ossimConnectableObject >	disconnectMyOutput (ossim_int32 outputIndex, bool disconnectInputFlag=true, bool createEventFlag=true)
	Will disconnect the object at the given output index and generate a connection event. More...

virtual void	disconnectMyOutput (ossimConnectableObject *output, bool disconnectInputFlag=true, bool createEventFlag=true)
	Will disconnect the output object. More...

virtual void	disconnectMyOutputs (ConnectableObjectList &outputList, bool disconnectOutputFlag=true, bool createEventFlag=true)

virtual void	disconnectAllInputs ()
	Will disconnect all of the input objects. More...

virtual void	disconnectAllOutputs ()
	Will disconnect all of the output objects. More...

virtual ossim_int32	connectMyInputTo (ossimConnectableObject *inputObject, bool makeOutputConnection=true, bool createEventFlag=true)
	Will try to connect this objects input to the passed in object. More...

virtual ossim_int32	connectMyInputTo (ossim_int32 inputIndex, ossimConnectableObject *inputObject, bool makeOutputConnection=true, bool createEventFlag=true)
	Will connect the specified input to the passed in object. More...

virtual bool	connectMyInputTo (ConnectableObjectList &inputList, bool makeOutputConnection=true, bool createEventFlag=true)

virtual ossim_int32	connectMyOutputTo (ossimConnectableObject *outputObject, bool makeInputConnection=true, bool createEventFlag=true)
	Will try to connect this objects output to the passed in object. More...

virtual bool	connectMyOutputTo (ConnectableObjectList &outputList, bool makeInputConnection=true, bool createEventFlag=true)

virtual bool	connectInputList (ConnectableObjectList &inputList)
	Will disconnect itself from all inputs and reset to the passed in input list. More...

virtual bool	connectOutputList (ConnectableObjectList &outputList)
	Will disconnect itself from all outputs and reset to the passed in output list. More...

virtual ossim_uint32	getNumberOfInputs () const
	Returns the number of input objects. More...

virtual ossim_uint32	getNumberOfOutputs () const
	Return the number of output objects. More...

ossimConnectableObject *	getInput (ossim_uint32 index=0)
	returns the object at the specified index. More...

const ossimConnectableObject *	getInput (ossim_uint32 index=0) const
	returns the object at the specified index. More...

ossimConnectableObject *	getOutput (ossim_uint32 index=0)
	returns the object at the specified index. More...

const ossimConnectableObject *	getOutput (ossim_uint32 index=0) const
	returns the object at the specified index. More...

virtual void	setNumberOfInputs (ossim_int32 numberOfInputs)
	Will set the number of inputs. More...

virtual bool	getInputListIsFixedFlag () const

virtual bool	getOutputListIsFixedFlag () const

virtual void	setNumberOfOutputs (ossim_int32 numberOfInputs)
	Will set the number of outputs. More...

const ConnectableObjectList &	getInputList () const

const ConnectableObjectList &	getOutputList () const

ConnectableObjectList &	getInputList ()

ConnectableObjectList &	getOutputList ()

	OSSIM_DEPRECATE_METHOD (virtual void findAllObjectsOfType(ConnectableObjectList &result, const RTTItypeid &typeInfo, bool recurse=true))

	OSSIM_DEPRECATE_METHOD (virtual void findAllObjectsOfType(ConnectableObjectList &result, const ossimString &className, bool recurse=true))

virtual void	propagateEventToOutputs (ossimEvent &event)

virtual void	propagateEventToInputs (ossimEvent &event)

virtual void	setProperty (const ossimString &name, const ossimString &value)

virtual ossim_uint32	saveStateOfAllInputs (ossimKeywordlist &kwl, bool saveThisStateFlag=true, ossim_uint32 objectIndex=1, const char *prefix=0) const
	Save the state of all inputs to a keyword list. More...

virtual bool	fillContainer (ossimConnectableContainer &container)
	Inserts this object and all of its children and inputs into the container provided. More...

bool	moveInputUp (const ossimId &id)
	Moves the input connection matching id up one in the connection list. More...

bool	moveInputDown (const ossimId &id)
	Moves the input connection matching id down one in the connection list. More...

bool	moveInputToTop (const ossimId &id)
	Moves the input connection matching id to the top of the connection list. More...

bool	moveInputToBottom (const ossimId &id)
	Moves the input connection matching id to the bottom of the connection list. More...

virtual void	accept (ossimVisitor &visitor)
	We will add a visitor interface for all connectable objects. More...

Public Member Functions inherited from ossimObject
	ossimObject ()

virtual	~ossimObject ()

virtual ossimObject *	dup () const

virtual RTTItypeid	getType () const

virtual bool	canCastTo (ossimObject *obj) const

virtual bool	canCastTo (const RTTItypeid &id) const

virtual bool	canCastTo (const ossimString &parentClassName) const

virtual bool	isEqualTo (const ossimObject &obj, ossimCompareType compareType=OSSIM_COMPARE_FULL) const

Public Member Functions inherited from ossimReferenced
	ossimReferenced ()

	ossimReferenced (const ossimReferenced &)

ossimReferenced &	operator= (const ossimReferenced &)

void	ref () const
	increment the reference count by one, indicating that this object has another pointer which is referencing it. More...

void	unref () const
	decrement the reference count by one, indicating that a pointer to this object is referencing it. More...

void	unref_nodelete () const
	decrement the reference count by one, indicating that a pointer to this object is referencing it. More...

int	referenceCount () const

Public Member Functions inherited from ossimListenerManager
	ossimListenerManager ()

virtual	~ossimListenerManager ()

virtual void	fireEvent (ossimEvent &event)

virtual bool	addListener (ossimListener *listener)

virtual bool	removeListener (ossimListener *listener)

virtual bool	findListener (ossimListener *listener)

Public Member Functions inherited from ossimPropertyInterface
	ossimPropertyInterface ()

virtual	~ossimPropertyInterface ()

virtual ossimString	getPropertyValueAsString (const ossimString &name) const

void	getPropertyList (std::vector< ossimRefPtr< ossimProperty > > &propertyList) const

void	setProperties (std::vector< ossimRefPtr< ossimProperty > > &propertyList)

Public Member Functions inherited from ossimErrorStatusInterface
	ossimErrorStatusInterface ()

virtual	~ossimErrorStatusInterface ()

virtual ossimErrorCode	getErrorStatus () const

virtual ossimString	getErrorStatusString () const

virtual void	setErrorStatus (ossimErrorCode error_status) const

virtual void	setErrorStatus () const

virtual void	clearErrorStatus () const

bool	hasError () const

Private Member Functions
bool	isSDSDataset (ossimString fileName)

Private Attributes
ossimRefPtr< ossimGdalTileSource >	m_gdalTileSource

std::vector< ossim_uint32 >	m_entryFileList

ossim_uint32	m_numberOfBands

ossimScalarType	m_scalarType

ossim_uint32	m_currentEntryRender

ossimRefPtr< ossimImageData >	m_tile

Additional Inherited Members
Public Types inherited from ossimImageHandler
enum	ossimImageHandlerOverviewCompressionType { OSSIM_OVERVIEW_COMPRESSION_NONE = 0, OSSIM_OVERVIEW_COMPRESSION_JPEG, OSSIM_OVERVIEW_COMPRESSION_LZW, OSSIM_OVERVIEW_COMPRESSION_DEFLATE, OSSIM_OVERVIEW_COMPRESSION_PACKBITS }

Public Types inherited from ossimConnectableObject
enum	ossimConnectableObjectDirectionType { CONNECTABLE_DIRECTION_NONE = 0, CONNECTABLE_DIRECTION_INPUT = 1, CONNECTABLE_DIRECTION_OUTPUT = 2 }

typedef std::vector< ossimRefPtr< ossimConnectableObject > >	ConnectableObjectList

Protected Member Functions inherited from ossimImageHandler
virtual ossimRefPtr< ossimImageGeometry >	getExternalImageGeometry () const
	Returns the image geometry object associated with this tile source or NULL if non defined. More...

virtual ossimRefPtr< ossimImageGeometry >	getInternalImageGeometry () const

virtual bool	getOverviewTile (ossim_uint32 resLevel, ossimImageData *result)
	Method to get an overview tile. More...

bool	initVertices (const char *file)
	Opens file and attempts to initialize the valid image vertices. More...

virtual void	completeOpen ()
	Will complete the opening process. More...

void	initImageParameters (ossimImageGeometry *geom) const
	Convenience method to set things needed in the image geometry from the image handler. More...

virtual void	establishDecimationFactors ()
	Virtual method determines the decimation factors at each resolution level. More...

virtual bool	setOutputBandList (const std::vector< ossim_uint32 > &inBandList, std::vector< ossim_uint32 > &outBandList)
	Convenience method to set output band list. More...

void	getFilenameWithNoExtension (ossimFilename &f) const
	Get filename with no extension, using supplentary directory for dirname if set. More...

Protected Member Functions inherited from ossimImageSource
	ossimImageSource (const ossimImageSource &rhs)

const ossimImageSource &	operator= (const ossimImageSource &)

Protected Member Functions inherited from ossimSource
	ossimSource (const ossimSource &rhs)

const ossimSource &	operator= (const ossimSource &rhs)

Protected Member Functions inherited from ossimConnectableObject
ossimConnectableObject *	findObjectOfType (ConnectableObjectList *connectableList, ossimVisitor &visitor)

Protected Member Functions inherited from ossimReferenced
virtual	~ossimReferenced ()

Protected Member Functions inherited from ossimListenerManager
	ossimListenerManager (const ossimListenerManager &rhs)

Protected Attributes inherited from ossimImageHandler
ossimFilename	theImageFile

ossimFilename	theOverviewFile

ossimFilename	theSupplementaryDirectory

ossimRefPtr< ossimImageHandler >	theOverview

vector< ossimIpt >	theValidImageVertices

ossimImageMetaData	theMetaData

ossimRefPtr< ossimImageGeometry >	theGeometry

ossimRefPtr< ossimNBandLutDataObject >	theLut

std::vector< ossimDpt >	theDecimationFactors

ossimString	theImageID

ossim_uint32	theStartingResLevel
	theStartingResLevel If set to something other than zero(default) this is indicative that the reader is an overview. More...

bool	theOpenOverviewFlag
	If true opening of overviews will be attempted. More...

ossimPixelType	thePixelType

std::shared_ptr< ossim::ImageHandlerState >	m_state

Protected Attributes inherited from ossimSource
bool	theEnableFlag

bool	theInitializedFlag

Protected Attributes inherited from ossimConnectableObject
ossimId	theId

ossimString	theDescription

ossimObject *	theOwner

bool	theInputListIsFixedFlag
	Indicates whether the theInputObjectList is fixed. More...

bool	theOutputListIsFixedFlag
	Indicates whether the theOutputObjectList is fixed. More...

ConnectableObjectList	theInputObjectList
	Holds a list of input objects. More...

ConnectableObjectList	theOutputObjectList
	Holds a list of output objects. More...

Protected Attributes inherited from ossimListenerManager
std::list< ossimListener * >	theListenerList

bool	theEnabledFlag

std::list< ossimListener * >	theDelayedAdd

std::list< ossimListener * >	theDelayedRemove

bool	theFireEventFlag

Protected Attributes inherited from ossimErrorStatusInterface
ossimErrorCode	theErrorStatus

Detailed Description

Definition at line 30 of file ossimHdfReader.h.

Constructor & Destructor Documentation

◆ ossimHdfReader()

ossimHdfReader::ossimHdfReader ( )

default construtor

Definition at line 36 of file ossimHdfReader.cpp.

   : ossimImageHandler(),
     m_gdalTileSource(0),
     m_entryFileList(),
     m_numberOfBands(0),
     m_scalarType(OSSIM_SCALAR_UNKNOWN),
     m_currentEntryRender(0),
     m_tile(0)
 {
 }

◆ ~ossimHdfReader()

ossimHdfReader::~ossimHdfReader ( )

virtual

virtural destructor

Definition at line 47 of file ossimHdfReader.cpp.

References close(), and ossimImageHandler::close().

 {
    close();
    ossimImageHandler::close();
 }

Member Function Documentation

◆ close()

void ossimHdfReader::close ( )

virtual

Method to close current entry.

Reimplemented from ossimImageHandler.

Definition at line 210 of file ossimHdfReader.cpp.

References m_entryFileList, m_gdalTileSource, m_tile, and ossimRefPtr< T >::valid().

Referenced by ~ossimHdfReader().

 {
    m_tile = 0;
 
    if (m_gdalTileSource.valid())
    {
       m_gdalTileSource = 0;
    }
    m_entryFileList.clear();
 }

◆ getClassName()

ossimString ossimHdfReader::getClassName ( ) const

virtual

Returns class name.

Returns: "ossimHdfReader"

Reimplemented from ossimObject.

Definition at line 63 of file ossimHdfReader.cpp.

 {
    return ossimString("ossimHdfReader");
 }

◆ getCurrentEntry()

virtual ossim_uint32 ossimHdfReader::getCurrentEntry ( ) const

inlinevirtual

Returns: The current entry number.

Reimplemented from ossimImageHandler.

Definition at line 177 of file ossimHdfReader.h.

177 { return m_currentEntryRender; }

ossimHdfReader::m_currentEntryRender

ossim_uint32 m_currentEntryRender

Definition: ossimHdfReader.h:197

◆ getCurrentEntryList()

std::vector<ossim_uint32> ossimHdfReader::getCurrentEntryList ( ossim_uint32 entryId ) const

◆ getDriverName()

ossimString ossimHdfReader::getDriverName ( )

Definition at line 418 of file ossimHdfReader.cpp.

References ossimGdalTileSource::getDriver(), m_gdalTileSource, and ossimRefPtr< T >::valid().

 {
    ossimString result = "";
    if (m_gdalTileSource.valid())
    {
       GDALDriverH driver = m_gdalTileSource->getDriver();
       if (driver)
       {
          result = GDALGetDriverShortName(driver);
       }
    }
    return result;
 }

◆ getEntryList()

void ossimHdfReader::getEntryList ( std::vector< ossim_uint32 > & entryList ) const

virtual

Parameters

entryList This is the list to initialize with entry indexes.

Note: This implementation returns puts one entry "0" in the list.

Reimplemented from ossimImageHandler.

Definition at line 395 of file ossimHdfReader.cpp.

References m_entryFileList.

 {
    entryList.clear();
    for (ossim_uint32 i = 0; i < m_entryFileList.size(); i++)
    {
       entryList.push_back(m_entryFileList[i]);
    }
 }

◆ getEntryString()

ossimString ossimHdfReader::getEntryString ( ossim_uint32 entryId ) const

Definition at line 404 of file ossimHdfReader.cpp.

References ossimGdalTileSource::getEntryNames(), m_gdalTileSource, and ossimRefPtr< T >::valid().

 {
    if (m_gdalTileSource.valid())
    {
       std::vector<ossimString> entryStringList;
       m_gdalTileSource->getEntryNames(entryStringList);
       if (entryId < entryStringList.size())
       {
          return entryStringList[entryId];
       }
    }
    return "";
 }

◆ getImageGeometry()

ossimRefPtr< ossimImageGeometry > ossimHdfReader::getImageGeometry ( )

virtual

Returns the image geometry object associated with this tile source or NULL if non defined.

The geometry contains full-to-local image transform as well as projection (image-to-world).

Reimplemented from ossimImageHandler.

Definition at line 353 of file ossimHdfReader.cpp.

References ossimGdalTileSource::getImageGeometry(), m_gdalTileSource, ossimImageHandler::theGeometry, and ossimRefPtr< T >::valid().

 {
    if ( !theGeometry )
    {
       // Check the internal geometry first to avoid a factory call.
       if ( m_gdalTileSource.valid() )
       {
          theGeometry = m_gdalTileSource->getImageGeometry();
       }
    }
    return theGeometry;
 }

◆ getImageTileHeight()

ossim_uint32 ossimHdfReader::getImageTileHeight ( ) const

virtual

Returns the tile width of the image or 0 if the image is not tiled.

Note: this is not the same as the ossimImageSource::getTileHeight which returns the output tile height which can be different than the internal image tile height on disk.

Implements ossimImageHandler.

Definition at line 334 of file ossimHdfReader.cpp.

References ossimGdalTileSource::getImageTileHeight(), m_gdalTileSource, and ossimRefPtr< T >::valid().

 {
    ossim_uint32 result = 128;
    if (m_gdalTileSource.valid())
    {
       result = m_gdalTileSource->getImageTileHeight();
    }
    return result;
 }

◆ getImageTileWidth()

ossim_uint32 ossimHdfReader::getImageTileWidth ( ) const

virtual

Returns the tile width of the image or 0 if the image is not tiled.

Note: this is not the same as the ossimImageSource::getTileWidth which returns the output tile width which can be different than the internal image tile width on disk.

Implements ossimImageHandler.

Definition at line 324 of file ossimHdfReader.cpp.

References ossimGdalTileSource::getImageTileWidth(), m_gdalTileSource, and ossimRefPtr< T >::valid().

 {
    ossim_uint32 result = 128;
    if (m_gdalTileSource.valid())
    {
       result = m_gdalTileSource->getImageTileWidth();
    }
    return result;
 }

◆ getLongName()

ossimString ossimHdfReader::getLongName ( ) const

virtual

Returns long name.

Returns: "ossim hdf reader"

Reimplemented from ossimObject.

Definition at line 58 of file ossimHdfReader.cpp.

 {
    return ossimString("ossim hdf reader");
 }

◆ getNumberOfEntries()

ossim_uint32 ossimHdfReader::getNumberOfEntries ( ) const

virtual

Returns: The number of entries (images) in the image file.

Reimplemented from ossimImageHandler.

Definition at line 390 of file ossimHdfReader.cpp.

References m_entryFileList.

 {
    return m_entryFileList.size();
 }

◆ getNumberOfInputBands()

ossim_uint32 ossimHdfReader::getNumberOfInputBands ( ) const

virtual

Returns the number of bands in the image.

Satisfies pure virtual from ImageHandler class.

Implements ossimImageSource.

Definition at line 314 of file ossimHdfReader.cpp.

References m_numberOfBands.

 {
    return m_numberOfBands;
 }

◆ getNumberOfLines()

ossim_uint32 ossimHdfReader::getNumberOfLines ( ossim_uint32 resLevel = 0 ) const

virtual

Gets number of lines for res level.

Parameters

resLevel Reduced resolution level to return lines of. Default = 0

Returns: The number of lines for specified reduced resolution level.

Implements ossimImageHandler.

Definition at line 68 of file ossimHdfReader.cpp.

References ossimGdalTileSource::getNumberOfLines(), ossimImageHandler::getNumberOfSamples(), m_gdalTileSource, ossimImageHandler::theOverview, and ossimRefPtr< T >::valid().

 {
    ossim_uint32 result = 0;
    if (resLevel == 0)
    {
       if (m_gdalTileSource.valid())
       {
          result = m_gdalTileSource->getNumberOfLines(resLevel);
       }
    }
    else if (theOverview.valid())
    {
       result = theOverview->getNumberOfSamples(resLevel);
    }
    return result;
 }

◆ getNumberOfOutputBands()

ossim_uint32 ossimHdfReader::getNumberOfOutputBands ( ) const

virtual

Returns the number of bands in a tile returned from this TileSource.

Note: we are supporting sources that can have multiple data objects. If you want to know the scalar type of an object you can pass in the

Reimplemented from ossimImageSource.

Definition at line 319 of file ossimHdfReader.cpp.

References m_numberOfBands.

Referenced by getTile().

 {
    return m_numberOfBands;
 }

◆ getNumberOfSamples()

ossim_uint32 ossimHdfReader::getNumberOfSamples ( ossim_uint32 resLevel = 0 ) const

virtual

Gets the number of samples for res level.

Parameters

resLevel Reduced resolution level to return samples of. Default = 0

Returns: The number of samples for specified reduced resolution level.

Implements ossimImageHandler.

Definition at line 86 of file ossimHdfReader.cpp.

References ossimGdalTileSource::getNumberOfSamples(), ossimImageHandler::getNumberOfSamples(), m_gdalTileSource, ossimImageHandler::theOverview, and ossimRefPtr< T >::valid().

 {
    ossim_uint32 result = 0;
    if (resLevel == 0)
    {
       if (m_gdalTileSource.valid())
       {
          result = m_gdalTileSource->getNumberOfSamples(resLevel);
       }
    }
    else if (theOverview.valid())
    {
       result = theOverview->getNumberOfSamples(resLevel);
    }
    return result;
 }

◆ getOutputScalarType()

ossimScalarType ossimHdfReader::getOutputScalarType ( ) const

virtual

Returns the output pixel type of the tile source.

Reimplemented from ossimImageSource.

Definition at line 344 of file ossimHdfReader.cpp.

References ossimGdalTileSource::getOutputScalarType(), m_gdalTileSource, m_scalarType, and ossimRefPtr< T >::valid().

 {
    if (m_gdalTileSource.valid())
    {
       return m_gdalTileSource->getOutputScalarType(); 
    }
    return m_scalarType;
 }

◆ getShortName()

ossimString ossimHdfReader::getShortName ( ) const

virtual

Returns short name.

Returns: "ossim_hdf_reader"

Reimplemented from ossimObject.

Definition at line 53 of file ossimHdfReader.cpp.

 {
    return ossimString("ossim_hdf_reader");
 }

◆ getTile() [1/2]

ossimRefPtr< ossimImageData > ossimHdfReader::getTile	(	const ossimIrect &	rect,
		ossim_uint32	resLevel = `0`
	)

virtual

Method to grab a tile(rectangle) from image.

Parameters

rect	The zero based rectangle to grab.
resLevel	The reduced resolution level to grab from.

Returns: The ref pointer with the image data pointer.

Reimplemented from ossimImageSource.

Definition at line 221 of file ossimHdfReader.cpp.

References ossimRefPtr< T >::get(), ossimDataObject::getDataObjectStatus(), m_tile, ossimImageData::makeBlank(), OSSIM_NULL, ossimImageData::setImageRectangle(), and ossimRefPtr< T >::valid().

 {
    if (m_tile.valid())
    {
       // Image rectangle must be set prior to calling getTile.
       m_tile->setImageRectangle(tile_rect);
       
       if ( getTile( m_tile.get(), resLevel ) == false )
       {
          if (m_tile->getDataObjectStatus() != OSSIM_NULL)
          {
             m_tile->makeBlank();
          }
       }
    }
 
    return m_tile;
 }

◆ getTile() [2/2]

bool ossimHdfReader::getTile	(	ossimImageData *	result,
		ossim_uint32	resLevel = `0`
	)

virtual

Method to get a tile.

Parameters

result The tile to stuff. Note The requested rectangle in full image space and bands should be set in the result tile prior to passing. This is the default implementation that is not thread-friendly as it uses the object's tile then simply copies its buffer to the provided tile. Eventually, all image sources should override this method.

Returns: true on success false on error. If return is false, result is undefined so caller should handle appropriately with makeBlank or whatever.

Note: Derived classes should override this method to most efficiently stuff result.

Reimplemented from ossimImageSource.

Definition at line 241 of file ossimHdfReader.cpp.

References ossimIrect::clipToRect(), ossimIrect::completely_within(), ossimImageData::getBuf(), ossimImageData::getImageRectangle(), ossimImageHandler::getImageRectangle(), ossimImageData::getNumberOfBands(), getNumberOfOutputBands(), ossimImageHandler::getOverviewTile(), ossimGdalTileSource::getTile(), isOpen(), ossimSource::isSourceEnabled(), ossimImageHandler::isValidRLevel(), ossimImageData::loadTile(), m_gdalTileSource, ossimImageData::makeBlank(), OSSIM_BSQ, ossimReferenced::ref(), status, ossimReferenced::unref(), ossimRefPtr< T >::valid(), and ossimImageData::validate().

 {
    bool status = false;
 
    //---
    // Not open, this tile source bypassed, or invalid res level,
    // return a blank tile.
    //---
    if( isOpen() && isSourceEnabled() && isValidRLevel(resLevel) &&
        result && (result->getNumberOfBands() == getNumberOfOutputBands()) )
    {
       result->ref();  // Increment ref count.
 
       //---
       // Check for overview tile.  Some overviews can contain r0 so always
       // call even if resLevel is 0.  Method returns true on success, false
       // on error.
       //---
       status = getOverviewTile(resLevel, result);
 
       if (!status) // Did not get an overview tile.
       {
          status = true;
 
          ossimIrect tile_rect = result->getImageRectangle();     
 
          if (getImageRectangle().intersects(tile_rect))
          {
             // Make a clip rect.
             ossimIrect clipRect = tile_rect.clipToRect(getImageRectangle());
 
             if (tile_rect.completely_within(clipRect) == false)
             {
                // Not filling whole tile so blank it out first.
                result->makeBlank();
             }
 
             if (m_gdalTileSource.valid())
             {
                ossimRefPtr<ossimImageData> imageData =
                   m_gdalTileSource->getTile(tile_rect, resLevel);
                result->loadTile(imageData->getBuf(), tile_rect, clipRect, OSSIM_BSQ);
             }
      
          }
          else // No intersection...
          {
             result->makeBlank();
          }
       }
       result->validate();
 
       result->unref();  // Decrement ref count.
    }
 
    return status;
 }

◆ isOpen()

bool ossimHdfReader::isOpen ( ) const

virtual

Method to test for open file stream.

Returns: true if open, false if not.

Implements ossimImageHandler.

Definition at line 205 of file ossimHdfReader.cpp.

References ossimRefPtr< T >::get(), and m_gdalTileSource.

Referenced by getTile().

 {
    return m_gdalTileSource.get();
 }

◆ isSDSDataset()

bool ossimHdfReader::isSDSDataset ( ossimString fileName )

private

Definition at line 191 of file ossimHdfReader.cpp.

References ossimString::contains(), and ossimString::split().

 {
   std::vector<ossimString> fileList = fileName.split(":");
   if (fileList.size() > 0)
   {
     ossimString  subName = fileList[0];
     if (subName.contains("_SDS"))
     {
       return true;
     }
   }
   return false;
 }

◆ isSupportedExtension()

bool ossimHdfReader::isSupportedExtension ( )

Definition at line 300 of file ossimHdfReader.cpp.

References ossimString::downcase(), ossimFilename::ext(), and ossimImageHandler::theImageFile.

 {
    ossimString ext = theImageFile.ext();
    ext.downcase();
 
    if ( ext == "hdf" || ext == "h4" || ext == "hdf4" || 
      ext == "he4" || ext == "hdf5" || ext == "he5" || ext == "h5" || 
      ext == "l1r")
    {
       return true;
    }
    return false;
 }

◆ loadState()

bool ossimHdfReader::loadState	(	const ossimKeywordlist &	kwl,
		const char *	prefix = `0`
	)

virtual

Method to the load (recreate) the state of an object from a keyword list.

Return true if ok or false on error.

Reimplemented from ossimImageHandler.

Definition at line 366 of file ossimHdfReader.cpp.

References ossimImageHandler::loadState(), and open().

 {
    bool result = false;
    if ( ossimImageHandler::loadState(kwl, prefix) )
    {
       result = open();
    }
    return result;
 }

◆ open()

bool ossimHdfReader::open ( )

virtual

Open method.

Returns: true on success, false on error.

Implements ossimImageHandler.

Definition at line 104 of file ossimHdfReader.cpp.

Referenced by loadState(), setCurrentEntry(), and setOutputBandList().

 {
    static const char MODULE[] = "ossimHdfReader::open";
 
    if (traceDebug())
    {
       ossimNotify(ossimNotifyLevel_DEBUG)
          << MODULE << " entered...\n"
          << "image: " << theImageFile << "\n";
    }
 
    bool result = false;
 
    if (!isSupportedExtension())
    {
       return false;
    }
 
    if (m_entryFileList.size() == 0)
    {
       if(isOpen())
       {
          close();
       }
 
       m_gdalTileSource = new ossimGdalTileSource;
       m_gdalTileSource->setFilename(theImageFile);
 
       if ( m_gdalTileSource->open() == false )
       {
          m_gdalTileSource = 0;
          return false;
       }
 
       std::vector<ossimString> entryStringList;
       if (m_gdalTileSource )
       {
          m_gdalTileSource->getEntryNames(entryStringList);
       }
       
       // bool isSwathImage = false;
       if (entryStringList.size() > 0)
       {
          for (ossim_uint32 i = 0; i < entryStringList.size(); i++)
          {
             m_entryFileList.push_back(i);
          }
       }
       else
       {
         result = false;
       }
    }
       
    //set entry id for the gdal tile source
    if (m_currentEntryRender < m_entryFileList.size())
    {
       
       m_gdalTileSource->setCurrentEntry(m_currentEntryRender);
       m_numberOfBands = m_gdalTileSource->getNumberOfInputBands();
 
       m_tile = ossimImageDataFactory::instance()->create(this, this);
       m_tile->initialize();
       
       completeOpen();
       result = true;
    }
    else
    {
       result = false;
    }
    
    if (result == false)
    {
       close();
    }
    
    if (traceDebug())
    {
       ossimNotify(ossimNotifyLevel_DEBUG)
          << MODULE << " exit status = " << (result?"true":"false\n")
          << std::endl;
    }
    
    return result;
 }

◆ setCurrentEntry()

bool ossimHdfReader::setCurrentEntry ( ossim_uint32 entryIdx )

virtual

Parameters

entryIdx Entry number to select.

Note: The implementation does nothing. Derived classes that handle multiple images should override.

Returns: true if it was able to set the current entry and false otherwise.

Reimplemented from ossimImageHandler.

Definition at line 376 of file ossimHdfReader.cpp.

References ossimString::clear(), m_currentEntryRender, open(), ossimImageHandler::theDecimationFactors, ossimImageHandler::theGeometry, ossimImageHandler::theOverview, and ossimImageHandler::theOverviewFile.

 {
    if (m_currentEntryRender == entryIdx)
    {
       return true; // Nothing to do...
    }
    theDecimationFactors.clear();
    theGeometry = 0;
    theOverview = 0;
    theOverviewFile.clear();
    m_currentEntryRender = entryIdx;
    return open();
 }

◆ setOutputBandList()

bool ossimHdfReader::setOutputBandList ( const std::vector< ossim_uint32 > & band_list )

virtual

If the image handler "isBandSeletor()" then the band selection of the output chip can be controlled.

This method returns false. Derived classes that are band selectors should override.

Parameters

band_list Requested bands.

Returns: true on success, false on error.

Reimplemented from ossimImageHandler.

Definition at line 432 of file ossimHdfReader.cpp.

References m_gdalTileSource, open(), and ossimGdalTileSource::setOutputBandList().

 {
    if (outputBandList.size() && m_gdalTileSource )
    {
       m_gdalTileSource->setOutputBandList(outputBandList);
       open();
       return true;
    }
    return false;
 }

Member Data Documentation

◆ m_currentEntryRender

ossim_uint32 ossimHdfReader::m_currentEntryRender

private

Definition at line 197 of file ossimHdfReader.h.

Referenced by setCurrentEntry().

◆ m_entryFileList

std::vector<ossim_uint32> ossimHdfReader::m_entryFileList

mutableprivate

Definition at line 194 of file ossimHdfReader.h.

Referenced by close(), getEntryList(), and getNumberOfEntries().

◆ m_gdalTileSource

ossimRefPtr<ossimGdalTileSource> ossimHdfReader::m_gdalTileSource

private

Definition at line 193 of file ossimHdfReader.h.

Referenced by close(), getDriverName(), getEntryString(), getImageGeometry(), getImageTileHeight(), getImageTileWidth(), getNumberOfLines(), getNumberOfSamples(), getOutputScalarType(), getTile(), isOpen(), and setOutputBandList().

◆ m_numberOfBands

ossim_uint32 ossimHdfReader::m_numberOfBands

private

Definition at line 195 of file ossimHdfReader.h.

Referenced by getNumberOfInputBands(), and getNumberOfOutputBands().

◆ m_scalarType

ossimScalarType ossimHdfReader::m_scalarType

private

Definition at line 196 of file ossimHdfReader.h.

Referenced by getOutputScalarType().

◆ m_tile

ossimRefPtr<ossimImageData> ossimHdfReader::m_tile

private

Definition at line 198 of file ossimHdfReader.h.

Referenced by close(), and getTile().

The documentation for this class was generated from the following files:

Public Member Functions

Private Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ossimHdfReader()

◆ ~ossimHdfReader()

Member Function Documentation

◆ close()

◆ getClassName()

◆ getCurrentEntry()

◆ getCurrentEntryList()

◆ getDriverName()

◆ getEntryList()

◆ getEntryString()

◆ getImageGeometry()

◆ getImageTileHeight()

◆ getImageTileWidth()

◆ getLongName()

◆ getNumberOfEntries()

◆ getNumberOfInputBands()

◆ getNumberOfLines()

◆ getNumberOfOutputBands()

◆ getNumberOfSamples()

◆ getOutputScalarType()

◆ getShortName()

◆ getTile() [1/2]

◆ getTile() [2/2]

◆ isOpen()

◆ isSDSDataset()

◆ isSupportedExtension()

◆ loadState()

◆ open()

◆ setCurrentEntry()

◆ setOutputBandList()

Member Data Documentation

◆ m_currentEntryRender

◆ m_entryFileList

◆ m_gdalTileSource

◆ m_numberOfBands

◆ m_scalarType

◆ m_tile